Driveway Gate
Installation.
Professional driveway gate installation across Hampshire, including timber gates, metal gates, swing gates, sliding gates, manual gates and electric driveway gate systems. If you are looking for experienced driveway gate installers in Hampshire, we design, build and install entrance gates around the property, not from a generic off-the-shelf template.
Driveway Gate Installation Done Properly
A proper driveway gate installation is not just a case of hanging a pair of gates. The entrance width, driveway layout, ground levels, posts, hinges, gate weight, opening direction and daily vehicle use all affect how well the finished system performs.
Perimeter Fencing and Gates installs driveway gates across Hampshire, including timber driveway gates, metal driveway gates, steel-framed timber gates, sliding gates, swing gates and automation-ready gate systems.
Each installation is specified around the property. That means the gate type, material, frame, post arrangement, ironmongery, finish and automation options are considered before the final design is agreed.
What a Driveway Gate Installation Involves
The right installation depends on the entrance, the gate type, the ground conditions and whether the system will be manual or automated.
Entrance Assessment
We assess the entrance layout, levels, opening space, existing surfaces, boundaries, vehicle access and the most suitable gate type.
Gate Specification
The gate material, frame, posts, hinges, hardware, finish and operation are specified around the property and how the entrance will be used.
Installation Work
Installation may include posts, foundations, track preparation, hanging, alignment, ironmongery, automation preparation and final adjustment.
Setup and Handover
Manual gates are checked for smooth operation. Electric gates are commissioned with controls, safety devices and access equipment where required.
How Much Does Driveway Gate Installation Cost?
As a guide, installed manual swing gate systems often sit around £2,500–£6,500+, depending on the gate size, material, posts, hinges, ground conditions and finish.
Steel-framed timber gates are commonly around £3,500–£7,500+. Sliding driveway gates can range from around £6,000–£14,000+, while electric driveway gate installations are often around £6,500–£15,000+ depending on motors, safety devices, access control, groundwork and cabling.
For a fuller breakdown, see our Driveway Gates Cost Guide.
Different Gate Types, Different Installation Requirements
Timber, steel-framed and modern driveway gates all need the right support, fixings, alignment and installation detail to perform properly long term.
Timber Gate Installation
Steel-Framed Gate Installation
Modern Gate Installation
Manual Gate Installation vs Electric Gate Installation
Manual driveway gates are usually simpler because they do not need motors, control panels, safety equipment or access control. They still need to be installed correctly, with suitable posts, hinges, alignment and enough clearance for daily use.
Electric driveway gates need a more detailed specification. The gate structure, posts, hinges or sliding hardware must be suitable for powered movement, and the system needs the correct motor, control equipment, safety devices and access control.
Where automation may be added later, it is best to design the gates with that in mind from the start. This can help avoid problems with gate weight, post strength, cable routes and motor position later on.
What We Consider Before Installing Driveway Gates
The best gate type depends on the entrance, the ground conditions and how the property is actually used.
Opening Space
Swing gates need enough driveway depth to open properly. Sliding gates need enough sideways run-back space along the boundary.
Ground Conditions
Ground levels, slopes, drainage, existing surfaces and foundation requirements can all affect the gate design and installation method.
Gate Weight
Larger timber, metal or steel-framed gates need suitable posts, hinges, frames and support to prevent long-term movement or poor operation.
Access Control
Electric gates may need keypads, intercoms, remote access, safety edges, photocells and clear pedestrian or vehicle movement planning.
Electric Driveway Gate Installation Must Include Safety
Electric driveway gates are powered systems, so safety needs to be built into the specification. The design should account for vehicle movement, pedestrians, children, visitors, force limitation and access control.
Safety edges, photocells, correct control equipment, commissioning and ongoing servicing all matter on an automated gate system.
We follow HSE powered gate safety guidance when specifying and installing automated gate systems.
Useful Pages Before Installing Driveway Gates
These guides explain driveway gate costs, swing gates, sliding gates, automation, electric gate installation and access control before you request a survey.
Driveway Gate Installation Across Hampshire
Perimeter Fencing and Gates installs driveway gates across Hampshire and the surrounding areas. For local driveway gate information, visit the relevant page below.
Driveway Gate Installation FAQs
Common questions about driveway gate installation, driveway gate installers, manual gates, electric gates, swing gates, sliding gates and installation costs.
How much does driveway gate installation cost?
As a guide, installed manual swing gate systems often range from around £2,500–£6,500+. Sliding gates can range from around £6,000–£14,000+, while electric driveway gate installations are often around £6,500–£15,000+ depending on gate type, groundwork, automation, safety equipment and access control. For a fuller breakdown, read our Driveway Gates Cost Guide.
Do you install both manual and electric driveway gates?
Yes. Perimeter Fencing and Gates installs manual driveway gates, automation-ready gates and fully electric driveway gate systems across Hampshire. For electric systems, see our Electric Gate Installation guide.
Can you install swing and sliding driveway gates?
Yes. We install swing driveway gates and sliding driveway gates. The best option depends on the driveway layout, ground levels, opening space and required access control. You can also read our Sliding Driveway Gates and Swing Driveway Gates guides.
Can driveway gates be installed ready for future automation?
Yes. Gates can be designed with future automation in mind, including stronger frames, suitable posts, correct hinge geometry, cable routes and space for motors or control equipment. For more detail, see our Driveway Gate Automation page.
What access control can be added to driveway gates?
Electric driveway gates can use keypads, intercoms, remote controls, GSM access, fobs, video entry and smart access systems. For more detail, read our Electric Gate Access Control guide.
Do electric driveway gates need safety equipment?
Yes. Electric driveway gates need a suitable safety specification, including appropriate safety devices, force setup, commissioning and ongoing maintenance. You can read more in our Are Electric Gates Safe? guide.
Do you provide driveway gate installers in Hampshire?
Yes. Perimeter Fencing and Gates provides driveway gate installation across Hampshire, including Southampton, Romsey, Winchester, Eastleigh, Chandlers Ford, Fareham, Ringwood and Lymington.
Request a Driveway Gate Installation Survey
We can assess your entrance, explain suitable gate options, and specify the right timber, metal, swing, sliding, manual or electric driveway gate system for your property.
Driveway Gate Installation FAQs
Common questions about driveway gate installation, driveway gate installers, manual gates, electric gates, swing gates, sliding gates and installation costs.
How much does driveway gate installation cost?
As a guide, installed manual swing gate systems often range from around £2,500–£6,500+. Sliding gates can range from around £6,000–£14,000+, while electric driveway gate installations are often around £6,500–£15,000+ depending on gate type, groundwork, automation, safety equipment and access control.
Do you install both manual and electric driveway gates?
Yes. Perimeter Fencing and Gates installs manual driveway gates, automation-ready gates and fully electric driveway gate systems across Hampshire.
Can you install swing and sliding driveway gates?
Yes. We install swing driveway gates and sliding driveway gates. The best option depends on the driveway layout, ground levels, opening space and required access control.
What type of driveway gate is best?
It depends on the property. Timber gates suit privacy and a softer traditional appearance, metal gates suit modern entrances, swing gates need opening space, and sliding gates can suit tighter driveways or wider entrances.
Can driveway gates be installed ready for future automation?
Yes. Gates can be designed with future automation in mind, including stronger frames, suitable posts, correct hinge geometry, cable routes and space for motors or control equipment.
Do you provide driveway gate installers in Hampshire?
Yes. Perimeter Fencing and Gates provides driveway gate installation across Hampshire, including Southampton, Romsey, Winchester, Eastleigh, Chandlers Ford, Fareham, Ringwood and Lymington.
Request a Driveway Gate Installation Survey
We can assess your entrance, explain suitable gate options, and specify the right timber, metal, swing, sliding, manual or electric driveway gate system for your property.